Top Hammer Drilling Tools
-
Handheld & Small Hole Drilling
​
Tapered Rod: 12-degree tapered; 0.3m-3.0m length.
Shank Rod: R25 thread; 0.3m-2.4m length.
Intergral Rod: 30mm-40mm diameter; 0.4.-2.4m length.
Coupling : R25 thread.
Drill Bit:
- 12-degree tapered; 28mm-45mm; button bit & cross bit.
- R25 thread; 33mm-48mm; button bit & cross bit.
Reamer:
- R25 thread; 76mm; one-piece.
- 6-degree; 57mm-89mm; reaming bit with pilot bit to suit.
-
Underground Development Drilling
​
Shank: T38, & T45 shanks to suit most drifters.
Coupling: R32, T38 & T45 thread.
Rod:
- R28, TR28, R32, R35, TR35, T38 & T45 thread.
- 2.4m-4.9m length; hex & round.
Drill Bit:
- R28, TR28, R32, R35, TR35, T38 & T45 thread.
- 35mm-64mm; button bit.
Reamer:
- R32, R35 & TR35 thread; 102mm-127mm; one-piece.
- 12-degree; 89mm-127mm; reaming bit with pilot to suit.
​
-
Underground Production Drilling
​
Shank: T38, T45, T51, ST58 & ST68 shanks to suit most drifters.
Rod & Tube:
- T38, T45, T51, ST58 & ST68 thread.
- 1.2m-1.8m length.
Bit Adapter: T38, T45, T51, ST58 & ST68 thread.
Drill Bit:
- T38, T45, T51, ST58 & ST68 thread.
- 64mm-127mm; button bit.
Reamer: T38, T45, T51, ST58 & ST68 thread; 89mm-300mm; one-piece.
-
Surface Bench Drilling
​
Shank: T45, T51 & EL60 shanks to suit most drifters.
Coupling: T45, T51 & EL60 thread.
Rod & Tube:
- T45, T51 & EL60 thread.
- 3.0m-7.3m length.
Bit Adapter: T45. T51 & EL60 thread.
Drill Bit:
- T45, T51 & EL60 thread.
- 70mm-152mm, button bit.
​
Down The Hole Drilling Tools
-
Conventional DTH Drilling
​
Drill Pipe:
- API, BECO, DIBH & T24 thread.
- 3.0m-6.0m, length.
Dill Sub:
- API, BECO, DIBH & T24 thread.
- 0.12m-1.0m, length.
DTH Hammer:
- IR-DHD, QL, SD & TD shank, valved & valveless.
- 2"-10" diameter.
DTH Drill Bit:
- IR-DHD, QL, SD & TD shank, valved & valveless.
- 76mm-270mm, button bit
​
-
Reverse Circulation Drilling
​
RC Hammer:
- Remet & Metzke thread.
- RE531, RE004, RE543, RE545, PR40, PR52 & PR54.
- Standard & Retention.
RC Drill Bit:
- RE531, RE004, RE543, RE545, PR40, PR52 & PR54.
- 102mm - 203mm, button bit.
- Standard & Retention.
Shroud: to suit all drill bit sizes.
​
-
Tricone Rotary Drilling
​
Rotary Drill Bit:
- Seal Bearing
- AP4-AP8
- 158mm-311mm
Furnace Tapping & Miscellaneous Products
-
Furnace Tapping Tools
​
Rod: chisel point, 1.0m-1.8m length.
Tapping Bit:
- R32 thread.
- 42mm-76mm, button bit & cross bit.
​
-
Miscellaneous Products
​
Rubber Rod Wiper: 35mm-175mm.
Fishing Tool: pike & sleeve type.
Lubricant: rockdrill oil & Moly grease.
Bit Resharpening Tool: sharpening machine & grinding pin.
Others: tungsten grip insert, grader teeth, pick cutter, etc.
​